Open plan offices
Open plan offices must accommodate the needs of many occupants. Solutions from FläktGroup factor in the challenges of these spaces to ensure that comfort is maintained with variable air temperature to meet the demands of office employees.
Challenge: Air Temperature challenge
Open plan offices must accomodate the needs of the many without affecting the comfort and productivity of any individuals. A particular challenge of these spaces is to ensure that environment is the correct temperature in spite of changing conditions, such as light entering at the windows or potential draughts.
Open plan offices have highly fluctuating occupancy levels and are seldom at full capacity. The ventilation on these open spaces needs to be variable in order to minimise cost and optimise efficiency.
Use: Medium density occupancy with low level partitioning within medium to large space
Room area: 50 m2
Number of persons: 4-20
Ventilation requirement: Normal
Solution: Air-Water System with Chilled Beams
Chilled beams provide ventilation, cooling/or heating. Working on the principle of induction to drive fresh air across heat exchanger coils, are the most efficient form of cooling with high comfort levels.
With cooling load distributed approximately 25%-75% between air and water, the highest proportion of the load is carried by water with 4 times higher cooling capacity than water, accounting for the highly efficient system.
Occupancy levels are rarely at 100% hence over cooling is the common complaint with CAV chilled beams systems operating on proximity sensing.
Ventilation levels in Open Plan office areas need to be turned down to match occupancy levels. VAV chilled beams with simple CO2 sensing would provide the required demand control at highest comfort levels.
Air-Water System with Fan Coil Units #1:
ISYteq CET-ACEC compact controller
- EC or AC fan control ensures great flexibility
- Automatic speed control enables energy management
- Noiseless valve control makes it possible to use this controller in hotel room applications
- Energy saving is achieved through night economy mode
- Up to 4 fan coil units can be regulated
Air-Water System with Fan Coil Units #2:
You can change your cookie consent settings at any time by accessing ‘Cookie Settings’ in the website menu. Here you can see in more detail which cookies you do not want to accept.
Advertising or Targeting Cookies
Types of Cookies
These cookies are necessary for the specific functions of a website to be carried out. For example, such cookies are used when a user puts a product in the shopping cart and then continues to surf the site (or other sites) before proceeding to checkout. This means that his shopping cart is not deleted even after closing a browser window.
These cookies collect information about the behavior of users on the site and whether users receive error messages (if so, where and after which events). Loading times or the behavior of the website with different browser types are also measured with performance cookies.
These cookies are not absolutely necessary, but increase the "usability" of a website. For example, the location entered once is saved so that the respective user can immediately see this location when the page is called up again. Form data that have been entered, the size of the font or the like, can also be saved.
Advertising or targeting cookies are explicitly there to show the user advertisements that match their surfing behavior. You often notice the use of these cookies after you have been to online shops: Advertisements for this shop reappear on many websites visited afterwards, sometimes with a (deliberate) delay of a few hours to a few weeks. In online marketing, this is also called "re-targeting".